Login Sign Up   Invite   Feedback  
Circuit Sage Forums | My Discussions | Start a Discussion
Circuit Sage Forum
Posted by Mansoor on November 9, 2008, 6:55 am
Please help me in solving this problem :
Design a circuit to control teh temperature of a water bath at a setpoint temperature of 75 degree celcius. Choose a resistive sendor and draw up a bridge circuit which will provide a control around the setpoint. Suggest values for all components to be used. Heat can be supplied to a heater in the bath using power amplifier which requires 0 to +0.5 V for zero to maximum power output.

Replies to This Discussion

Reply by Max on November 19, 2008, 1:23 pm
I just feel for you and wish I could help you. Im a College student and would see what I can do. Cheer up man!!
Reply by Carlos Gamero on December 5, 2008, 7:11 pm
Hi, in this page a Wheatstone bridge is discussed as a way to control temperature.http://www.doctronics.co.uk/voltage.htmSo maybe set one up so that the output is 0.25 Volts when the temperature is 75 F?
Reply by mmwork on February 9, 2014, 10:25 pm
Like I said, it's a trade-off and one that most likely is not best for everyone. Another trade-off you possibly can make is gemming expertise considerably more strongly.http://www.rsgoldfast.com/
Reply by gwxv on August 2, 2014, 12:02 am
Troverete cos¨¬ abbondanti tipi modificati del gioco del calcio [url=http://www.worldcup-it.com/uefa/francia/]Francia Maglie Calcio Basso Prezzo[/url] Jersey che alcune persone ora ancora l'aggregazione solo per divertimento-che per un terribilmen

back to top