Login Sign Up   Invite   Feedback  
Circuit Sage Forums | My Discussions | Start a Discussion
Circuit Sage Forum
avatar
Posted by Carlos Gamero on November 1, 2008, 7:12 pm
Hi, does anyone know a way to have Cadence read and simulate a SPICE netlist? For example, if I want to put a diode from a certain manufacturer, can I put the diode symbol view from analogLib and then have it somehow point to a netlist (model file) for that diode? In PSpice and HSPICE I remember we could do this for a diode connected between nodes 1 and 5:

D1 1 5 DI1N4004
.MODEL DI1N4004 D (IS=76.9n RS=42.0m BV=400 IBV=5.00u CJO=39.8p
+M=0.333 N=1.45 TT=4.32u)

Can I do this in Cadence? Thanks!

Replies to This Discussion

avatar
Reply by ywguo on December 3, 2008, 3:34 am
Please create a symbol named DI1N4004 and instantiate it in your schematic. Then include the SPICE netlist (your diode model file) in Analog Design Environment. Pls choose Setup -> Simulation Files ... Then put the path and file name in "Stimulus File".
avatar
Reply by goldwow on September 7, 2013, 12:59 am
Really like your siteŁ¬ I feel very good .this is our website also recommend to you all to share.---------------------------------------------------------------------http://www.aionhome.com/Gold http://www.fitrsgold.com/Runescape.Gold

back to top